Pianos routinely make movers yearly list of products that are most often damaged. Grand pianos are especially bothersome. Practicing the following procedures for disassembling, cushioning and loading grand pianos will prevent damage, lower claims cost, and enhance client satisfaction.
1) At least 3 people are required to deal with a child grand piano. If the infant grand piano needs to increase or down stairs or if a full or show grand piano needs to be transferred, a minimum of 4 individuals are required.
2) Always complete a accurate and extensive inventory. It may be more effective or necessary to use a visual stock to effectively describe and show pre-existing damage.
3) As different parts are dismantled, please location all hardware in a properly labeled parts bag and after that position the parts bag in a "Parts Box".
4) Get rid of the music rack (lyre) from its track by pulling it towards the keyboard. Wrap it in a tidy furnishings pad.
5) Detach the lid by eliminating the hinge pins. Have someone wiggle the lid, holding it opposite the hinge, while a second person works the pin loose. Please beware not to damage the wood with the pliers or with the pin itself. Cover the jaws of the pliers with a small cloth to assist avoid damage to the wood if needed. Wrap the cover in a clean furniture pad.
6) Get rid of the prop that holds the cover open and wrap it in a tidy furniture pad. The prop has a hinge pin and is in 2 pieces.
7) Remove the pedal assembly and cover it in a tidy furniture pad. When getting rid of the screws, please be cautious not to drop the braces. As you deal with the piano, number the push-rods from left to right as "1", "2", and "3", by positioning a piece of masking tape with the suitable number on each rod.
8) Pad the piano by putting a tidy rolled furniture pad (stretch-wrap the pad to prevent it from unrolling) on the cover of the keyboard to avoid it from tumbling open while you manage the piano. Keep in mind: Please make sure that the surface area of the piano is dust-free prior to padding it.
9) Position a piano board and connect the straps so that it is all set to get the piano. The raised brace on the piano board must be at the keyboard end of the piano.
10) Remove the left front leg by placing one person below the piano at the left end of the keyboard. Be sure to have two people raising the corner of the piano while the third person removes the leg. Keep in mind: Please be sure to keep in mind which legs were eliminated from which positions given that some pianos have legs that are not interchangeable.
11) Place the piano on the piano board by reducing the "leg-less" end onto the board. Please be sure to raise the entire piano somewhat while completing this maneuver to prevent excessive pressure on the remaining, connected legs as the piano tips. Be sure that the piano is centered snugly against the brace at the end of the piano board.
12) Remove the two staying legs and cover them in tidy furniture pads. These legs are held in location by a "crucial and slot" plan. To eliminate the leg, slide it inward toward the center of the piano up until it comes out of the slot.
13) Secure the piano to the piano board by bringing completions of the straps together and attaching them. Place folded burlap pads over the furniture pads however under the straps to offer additional defense to the edges of the piano. To avoid the strap near the narrow end of the piano from slipping off, connect the loose ends of the 2 straps together.
14) To move the piano over a flat, level surface area, tilt the piano and piano board and place a four-wheel dolly under the center of the piano board.
15) To move the piano up or down stairs, utilize the piano board as a skid. After sufficiently padding the stairs for defense versus residence damage, position the keyboard end of the piano toward the bottom of the stairs. Attach a bulge strap to the top end of the piano board to avoid the piano from slipping.
16) To load the This Site piano, leave it on the piano board and location it in a tier as the first base product with the keyboard dealing with the wall of the preceding tier. The finest place to load the cushioned lid is in between the piano and the preceding tier or in between the piano and the wall.
Grand pianos represent a considerable challenge, they can be moved without damage by using typical sense and practicing the treatments listed above.