Pianos routinely make movers annual list of items that are most often harmed. Grand pianos are particularly troublesome. Practicing the following treatments for taking apart, padding and loading grand pianos will prevent damage, lower claims expenditure, and enhance client complete satisfaction.
1) A minimum of 3 individuals are needed to handle a child grand piano. If the infant grand piano requires to increase or down stairs or if a full or show grand piano requires to be transported, a minimum of four people are required.
2) Always complete a extensive and accurate inventory. It might be more effective or required to utilize a visual stock to sufficiently describe and show pre-existing damage.
3) As different parts are taken apart, please place all hardware in a properly identified parts bag and then put the parts bag in a "Components Box".
4) Get rid of the music rack (lyre) from its track by pulling it towards the keyboard. Wrap it in a clean furnishings pad.
5) Detach the lid by getting rid of the hinge pins. Have a single person wiggle the cover, holding it opposite the hinge, while a second individual works the pin loose. Please be cautious not to damage the wood with the pliers or with the pin itself. If essential, cover the jaws of the pliers with a small fabric to assist avoid damage to the wood. Wrap the lid in a clean furniture pad.
6) Eliminate the prop that holds the cover open and wrap it in a tidy furnishings pad. The prop has a hinge pin and remains in 2 pieces.
7) Get rid of the pedal assembly and cover it in a clean furniture pad. The braces at the rear of the assembly rest in slots at each end. When removing the screws, please take care not to drop the braces. In addition, please be especially careful with the push-rods so that they will not get bent. As you face the piano, number the push-rods from left to right as "1", "2", and "3", by placing a piece of masking tape with the appropriate number on each rod. Keep in mind: If masking tape is not available, please use correctly labeled parts bags for this function. When reassembling at location, please make sure to put the rods in the appropriate order so that the pedals will work correctly.
8) Pad the piano by placing a tidy rolled furniture pad (stretch-wrap the pad to avoid it from unrolling) on the cover of the keyboard to prevent it from tumbling open while you handle the piano. Cover the top of the piano with 2 clean furnishings pads, neatly folded around the keyboard. Usage rubber bands to secure the pads. Keep in mind: Please ensure that the surface area of the piano is dust-free before padding it. Padding a highly sleek surface that is dirty may trigger fine scratches, particularly on a black lacquer surface.
9) Position a piano board and connect the straps so that it is ready to receive the piano. The raised brace on the piano board need to be at the keyboard end of the piano.
10) Eliminate the left front leg by positioning one person underneath the piano at the left end of the keyboard. Be sure to Get More Info have 2 individuals lifting the corner of the piano while the 3rd individual removes the leg. Keep in mind: Please be sure to keep in mind which legs were eliminated from which positions considering that some pianos have legs that are not interchangeable.
11) Location the piano on the piano board by lowering the "leg-less" end onto the board. Please be sure to raise the entire piano somewhat while finishing this maneuver to prevent unnecessary pressure on the staying, connected legs as the piano tips. Be sure check here that the piano is centered comfortably against the brace at the end of the piano board.
12) Remove the two staying legs and cover them in tidy furnishings pads. These legs are held in place by a "essential and slot" plan. To get rid of the leg, slide it inward towards the center of the piano till it comes out of the slot.
13) Protect the piano to the piano board by bringing the ends of the straps together and fastening them. Place folded burlap pads over the furnishings pads however under the straps to supply additional protection to the edges of the piano. To prevent the strap near the narrow end of the piano from slipping off, tie the loose ends of the 2 straps together.
14) To move the piano over a flat, level surface, tilt the piano and piano board and place a four-wheel dolly under the center of the piano board.
15) To move the piano up or down stairs, use the piano board as a skid. After sufficiently padding the stairs for protection versus house damage, position the keyboard end of the piano towards the bottom of the stairs. Connect a bulge strap to the top end of the piano board to prevent the piano from slipping.
16) To load the piano, leave it on the piano board and location Bonuses it in a tier as the very first base item with the keyboard facing the wall of the preceding tier. The best place to fill the cushioned lid is in between the piano and the preceding tier or in between the piano and the wall.
Although grand pianos represent a significant obstacle, they can be moved without damage by utilizing typical sense and practicing the procedures listed above.